RANCANG BANGUN SISTEM MONITORING KONSUMSI ENERGI LISTRIK PADA PLTS BERBASIS IOT
DOI:
https://doi.org/10.36080/skanika.v9i1.3657Keywords:
Blynk, Internet of Thing, Monitoring Energi, PLTSAbstract
Technological developments and the intensity of community activities have driven an increase in demand for electrical energy, thereby necessitating the exploration of sustainable alternative energy sources. One relevant solution is the utilization of Solar Power Plants (SPPs). This research focuses on the design and development of an energy consumption monitoring system for PLTS by adopting the Internet of Things (IoT) concept. The system development integrates PZEM-004T sensors to measure AC voltage, current, power, and energy parameters, ACS712 sensors for accurate current measurement, and special voltage sensors to monitor DC battery conditions. The entire control and data acquisition process is managed by the NodeMCU ESP32 module as the main processing unit. The data obtained is then displayed in real-time through the Blynk application interface. The research method applied is experimental, covering the stages of hardware design, software development, and overall IoT system integration. The evaluation results show that the system operates well, is capable of providing accurate electrical parameter readings, displays data with very low latency (around 0.1 seconds), and effectively supports remote ON/OFF control of electrical loads. Thus, this system is expected to contribute to improving
Downloads
References
[1] D. R. R. P. Putra and J. Joko, “Perancangan Alat Monitoring Kinerja PLTS Off Grid Berbasis IoT Menggunakan NodeMCU ESP 32 dan Telegram,” Jurnal Teknik Elektro, vol.13, no. 3, pp. 248-255, 2024, doi: 10.26740/jte.v13n3.p248-255.
[2] M. T. Muslihi, “Pengembangan dan Evaluasi Sistem Monitoring Konsumsi Daya Listrik Berbasis IoT dengan Sensor PZEM-004T dan ESP8266,” Jurnal Fasilkom, vol. 15, no. 1, pp. 77–83, 2025, doi: 10.37859/jf.v15i1.8508.
[3] Y. Badruzzaman, et al., “Rancang Bangun Sistem Monitoring Solar Panel Rooftop dengan Pendingin Menggunakan Mikrokontroller Berbasis IoT,” ORBITH: Majalah Ilmiah Pengembangan Rekayasa dan Sosial, vol. 20, no. 3, pp. 266–271, 2024, doi: 10.32497/orbith.v20i3.6259.
[4] Z. A. Almunawar, and T. Muchtar, “Design and Development of an Energy Monitoring System for Solar Power Plants and Inverter Output as an Energy Source in Smart Homes,” JEAT: Journal of Electrical and Automatian Technology, vol. 4, no. 1, pp. 92-100, 2025, doi: 10.61844/jeat.v4i1.1159.
[5] R. Sirait, M. Pardede, E. Hutajulu, and S. C. Y. Pardede, “Implementation of PZEM-004T and LoRa for Internet of Things–Based Monitoring of Power Supply Sources in Laboratory Building,” Jurnal Mandiri IT, vol. 14, no. 2, pp. 223–235, 2025, doi: 10.35335/mandiri.v14i2.457.
[6] T. H. Rangkuti, “Design of IoT Based Electrical Parameter Monitoring System using NodemCu V3 and PZEM-004T V3 Sensor,” Tsabit Journal of Computer Science, vol. 2, no. 1, pp. 1–8, 2025, 10.56211/tsabit42.
[7] L. O. Sari, M. F. E. Saputra, and E. Safrianti, “Sistem Monitoring Arus Listrik Berbasis Internet of Things (IoT) pada Solar Panel di Laboratorium Pembangkit Listrik Tenaga Surya (PLTS) UIN Suska Riau,” MALCOML: Indonesian of Journal Machine Learning and Computer Science, vol. 4, no. 1, pp. 205–211, 2024, doi: 10.57152/malcom.v4i1.1033.
[8] T. D. Lorobezy, and K. Krismadinata, "Rancang Bangun Sistem Monitoring PLTS OFF-Grid Berbasis IoT," MSI Transaction on Education, vol. 4, no. 2, pp. 71–84, 2023, doi: 10.46574/mted.v4i2.111.
[9] M. B. Arief, M. Widyartono, W. Aribowo, and A. L. Wardani, "Desain Pembangkit Listrik Tenaga Surya Off-Grid dan Monitoring Berbasis Node-Red," Elposys: Jurnal Sistem Kelistrikan, vol. 11, no. 1, pp. 45–50, 2024, doi: 10.33795/elposys.v11i1.4906.
[10] L. E. Nuryanto, "Perancangan Sistem Kontrol Pembangkit Listrik Tenaga Hybrid (PLN dan PLTS) Kapasitas 800 Wp," ORBITH: Majalah Ilmiah Pengembangan Rekayasa dan Sosial, vol. 17, no. 3, pp. 196–205, 2021, doi: 10.32497/orbith.v17i3.3443.
[11] B. D. Waluyo, et al., “Sistem Monitoring PLTS Berbasis IoT Sebagai Media Pembelajaran,” Jurnal Teknologi Informasi & Komunikasi dalam Pendidikan, vol. 11, no. 1, pp. 21–26, 2024, doi: 10.24114/jtikp.v11i1.60282.
[12] H. A. Wahid, J. Maulindar, amd A. I. Pradana, "Rancang Bangun Sistem Penyiraman Tanaman Otomatis Aglonema Berbasis IoT Menggunakan Blynk dan NodeMCU 32," Innovative: Journal of Social Science Research, vol. 3, no. 1, pp. 12–20, 2023, doi: https://doi.org/10.31004/innovative.v3i2.
[13] S. L. Nalbalwar, et al., “IoT-Based Smart Energy Meter with Real-Time Monitoring and Theft Detection using Arduino and PZEM004T,” International Journal of Engineering Research & Technology (IJERT), vol. 14, no. 12,, pp. 1–8, 2025, doi: 10.5281/zenodo.18073175.
[14] Z. Syahtuta and M. Haryanti, “Rancang Bangun Solar Tracker Dual Axis Berbasis Iot (Internet Of Thing),” Jurnal Teknologi Industri, vol. 12, no. 2, 2023, doi: 10.35968/jti.v12i2.1118.
[15] E. E. P. Sonya Widyawati Putri, Gaguk Marausna, “Analisis Pengaruh Intensitas Cahaya Matahari Terhadap Daya Keluaran,” vol. 8, no. 1, 2022, doi: 10.56521/teknika.v8i1.587
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Renta Risnauli N, Toibah Umi Kalsum, Yessi Mardiana
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
CC BY-SA 4.0
Creative Commons Attribution-ShareAlike 4.0 International
This license requires that reusers give credit to the creator. It allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, even for commercial purposes. If others remix, adapt, or build upon the material, they must license the modified material under identical terms.
BY: Credit must be given to you, the creator.
SA: Adaptations must be shared under the same terms.ng
